MEASURING EQUIPMENT

The automotive parts division realizes zero-defect products through customer-oriented thinking, automated systems,
stringent quality assurance using high performance measuring equipment and strict test standards.

MEASUREMENT

3D MEASURING MACHINE
- Spes: 1200X1800X1000 8 units
- Use: 3D measurement
This machine forms the dimensions, position and geometric shape of an object using a probe as a means of mobility and displays the result or calculates the correlation between shapes required by the designer and displays its acceptance status.
ROUNDNESS MEASURING MACHINE
- Specs: 600X120X1000
- Use: Measurement of roundness and cylindricity
The machine measures a gap between the theoretical roundness of internal or external diameter and the subject circle and determines whether it meets user's needs.

MATERIAL DEFECT ANALYSIS

MICRO CT SCANNER
- Specs: 230KV×0.608mA
- Use: Analysis of internal defects of material
This unit uses the permeability of x-ray to reorganize and scan slice data of cross-section into 3D and tests and analyzes the location, size and direction of progress of internal defects in non-destructive states.
X-Ray
- Specs: MU-2000, 160KV
- Use: Analysis of internal defects of material
This unit is used to test and analyze any internal defect of industrial products in 2D, such as cracks or internal defects of welding in non-destructive states.

MATERIAL ENDURANCE TEST

ENDURANCE TESTER
- Specs: 5-ton×1138×520
- Use: Fatigue endurance testing
This unit is used to test the endurance of the specimen against cyclic fatigue load. Usually, it runs hundreds to millions of cycles to test any deformation, fracture or abnormality.

DEBRIS PARTICLE ANALYSIS

PARTICLE ANALYSIS MICROSCOPE
- Specs: Axio Imager M2m
- Use: Debris particle analysis
The cleanliness of an automobile engine and transmission is a key issue in quality control. Instead of debris weight testing, this unit is used to test and analyze the particle size and metal/non-metal mix ratio of debris.